Resumo

VIEIRA, Victor Talarico Leal et al. Rev. Bras. Odontol. [online]. 2017, vol.74, n.1, pp. 23-26. ISSN 1984-3747.

Objective: Hyflex CM instruments were developed for debridement of the root canal system. The control-memory alloy recovers its shape on sterilization, thereby allowing instrument reuse. This study investigated the effect of shape recovery by sterilization on the fatigue life and crack formation of Hyflex CM NiTi instruments. Material and Methods: the cyclic fatigue test was performed in two groups: In the first, it was continuously performed to establish the fatigue life (group 1, n = 10); in the second, it was performed with outages of 30s to evaluate cracks' nucleation and propagation (group 2, n = 10). The test was performed using a stainless steel canal that was 1.5mm in diameter and 3.5mm in depth, with an arc of 9.42mm and radius of curvature of 6mm. The instruments were driven at 300 rpm. The fatigue time was recorded using a digital stopwatch (Technos). An electronic microscope (Quanta 250) was used to observe the crack formation and growth during the cyclic fatigue. Results: the autoclaved instruments endured 1196.67+214.63 cycles, and the non-autoclaved endured 1000+199.42 cycles until the occurrence of fracture. The t-student test (α=5%) revealed a significant difference. The cyclic fatigue test with pauses demonstrated a significantly longer cyclic fatigue life than the continuous cyclic fatigue test (p<0.05). Conclusion: as revealed by SEM images, cracks grow with an increase in the number of cycles to fracture (NCF). It can be concluded that the shape of Hyflex CM instruments recovered by autoclaving withstood significantly more NCF than non-autoclaved instruments (p<0.05), demonstrating an improvement of approximately 16%.

Palavras-chave : Endodontics; Electron microscopy; Fatigue resistence; Control memory NiTi files..