SciELO - Scientific Electronic Library Online

 
vol.19 número1Avaliação da centralização do preparo e da topografia de três sistemas rotatórios de níquel-titânioAnálise do reparo de defeitos ósseos preenchidos com β-Tricálcio Fosfato associado a implantes de titânio índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


RFO UPF

versão impressa ISSN 1413-4012

Resumo

PRADO, Maíra do; ASSIS, Danielle Ferreira de  e  SIMAO, Renata Antoun. Effects of short-term chemical disinfection on gutta-percha and Resilon surfaces. RFO UPF [online]. 2014, vol.19, n.1, pp.21-26. ISSN 1413-4012.

Objective: To assess the effect of 5.25% sodium hypochlorite (NaOCl) and 2% chlorhexidine (CHX) solutions on the topography and roughness of gutta-percha and Resilon surfaces. Materials and method: Flat surfaces of gutta-percha and Resilon cones were used. Six groups were assessed: Control GP (CGP) - gutta-percha immersed in distilled water (DW) for 1 minute; CHX GP (CHXGP) - gutta-percha immersed in CHX solution for 1 minute and then washed with DW; NaOCl GP (NGP) - gutta-percha immersed in NaOCl for 1 minute and then washed with DW; Control RE (CR) - Resilon immersed in DW for 1 minute; CHX RE (CHXR) - Resilon immersed in CHX solution for 1 minute and then washed with DW; and NaOCl RE (NR) - Resilon immersed in NaOCl for 1 minute and then washed with DW. Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), and Profilometry were used to analyze the samples before and after treatment. Roughness values obtained through profilometry were statistically analyzed using Kruskal-Wallis e Mann-Whitney tests (p < 0.05). SEM and EDS findings were qualitatively assessed. Results: The initial and final roughness values were, respectively: CGP - 0.15 ± 0.02/ 0.15 ± 0.01; CHXGP - 0.16 ± 0.02/ 0.15 ± 0.01; NGP - 0.17 ± 0.01/ 0.16 ± 0.02; CR - 0.16 ± 0.01/ 0.16 ± 0.01; CHXR - 0.16 ± 0.01/ 0.16 ± 0.01, and NR - 0.16 ± 0.01/ 0.16 ± 0.01. Statistical analysis revealed no significant changes in roughness values after using decontamination solutions. Additionally, no topographic and chemical changes were observed. Conclusion: Chemical disinfection showed no alteration on gutta-percha and Resilon surfaces.

Palavras-chave : Topography.; Root canal irrigants.; Dental materials.; Endodontics..

        · resumo em Português     · texto em Português     · Português ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons