SciELO - Scientific Electronic Library Online

 
vol.9 número3Evaluation of radiographic waste management in dental offices and radiology clinics of São Luís (MA)Fracture resistance, two point bending strength and morphological characteristics of pulpless teeth restored with fiber-reinforced composite posts índice de autoresíndice de assuntospesquisa de artigos
Home Pagelista alfabética de periódicos  

Serviços Personalizados

Journal

Artigo

Indicadores

Links relacionados

  • Não possue artigos similaresSimilares em SciELO

Compartilhar


RSBO (Online)

versão On-line ISSN 1984-5685

Resumo

TONETTO, Mateus Rodrigues et al. Effect of staining agents on color change of composites. RSBO (Online) [online]. 2012, vol.9, n.3, pp.266-271. ISSN 1984-5685.

Introduction: Composite resins are materials that can present color changing when exposed to pigments. Objective: The aim of this study was to evaluate, in vitro, the color changing of composites after immersion in different substances for different periods. Material and methods: Two microhybrid composite resins: Charisma (Heraeus - Kulzer) and Opallis (FGM) were used. Red wine and acai pulp were also used as immersion medium. For this study, 32 specimens with 10 mm of diameter and 2 mm of thickness were used, divided into 4 groups: Group 1 - Opallis composite immersed in red wine solution; Group 2 - Opallis composite immersed in acai berry pulp solution; Group 3 - Charisma composite immersed in red wine solution; Group 4 - Charisma composite immersed in acai berry pulp solution. The specimens were evaluated in the following time periods: T0 - baseline, T1 - 24 hours, T2 - 48 hours, T3 - 72 hours and T4 - 96 hours. For the assessment of staining, a spectrophotometer for colorimetry was used (Color Guide 45 / 0, PCB 6807 BYK-Gardner Gerestsried GmBH, Germany), and the values obtained were transferred to a computer and recorded according to CIELAB system. Results: The data were evaluated using Kruskal- Wallis non-parametric tests with the following mean values for the immersion periods of 24, 48, 72 and 96 hours, respectively: G1 - 7.35, 7.84, 9.04,10.48; G2 - 2.92, 4.15, 4.30, 4.64; G3 - 3.14, 7.35, 8.13, 8.43, G4 - 4.49, 5.99, 6.92, 6.76. Conclusion: Red wine showed a higher tendency toward altering the composite color than acai berry pulp. In addition, no significant difference was found concerning to the behavior of the two composite resins. Concerning to the immersion time periods, significant differences were only observed among the groups in the 24 hour time period.

Palavras-chave : coloring agents; staining; composite resins..

        · texto em Inglês     · Inglês ( pdf )

 

Creative Commons License Todo o conteúdo deste periódico, exceto onde está identificado, está licenciado sob uma Licença Creative Commons